Can air handler be moved to garage?

If the air handler is moved to the garage it will only change location by about 6′ then drop down to garage.

Historically, in many parts of the country, air handling equipment and ductwork was installed inside the attached garage to preserve livable space within the home. They can be installed in a utility closet or utility room in the home, in an unvented attic, or in an insulated and air-sealed basement or crawlspace.

Likewise, where should air handler be installed? To avoid the need for long ducting that can reduce efficiency, the air handler is best installed as close to the center of the home as possible. Two common installation choices are a utility closet inside the house or a well-sealed equipment room in the garage.

Also Know, how much does it cost to move an air handler?

Cost to Replace an Air Handler

New Air Handler $700-$1,500
Installation $1,200-$1,800
Remove/Dispose of Old Unit $300-$500
Total $2,200-$3,800

How do I stop my air handler from sweating?

Sealing the Crawl Space Properly: If you have the air handler unit mounted at the crawl space of your house, then sealing the crawl space properly in order to prevent the humid outside air and/or ground moisture coming inside will definitely help you reduce/eliminate the sweating problem.

How long do air handlers last?

Many homeowners decide to replace it after about 10-15 years for a new, more efficient model. In the long-run, replacing the system every 15-20 years (most systems’ average life expectancy) is more economical in terms of maintenance fees and energy bills.

Can a furnace be in the garage?

It is very common to install the furnace and water heater in the garage. Most new homes in my area put the water heater and furnace in the garage 90% of the time. If you recommend enclosing the furnace you will look like a fool in my opinion.

Can an air handler be moved?

Yes, move the air handlers inside.

Where should a furnace be located in a house?

Typically your furnace is centrally located in the home. It is usually located in an area such as a utility closet (by a cold air return), garage, attic, basement, or crawlspace; in the case of a heat-pump (a dual-system) it will be located outside of the home.

What does an air handler do?

The job of the handler is to circulate the air throughout your home. The indoor air handler unit comprises an air filter, coil, and blower. The handler pulls air in, passes it over the coils (to cool or heat), and then blows it back out into the home through the duct system.

Can I put my furnace outside?

Placing a gas furnace outdoors is an option for homeowners with limited space or the need for a large furnace that would be difficult to install inside. Outdoor gas furnaces burn natural gas and can keep an entire home warm throughout the winter months for a minimal cost.

How do you install an air handler in a closet?

Install the air handler, filter-backed grille, and supply plenum connection (Figures 13, 14, and 15). Seal the joint between the air handler and the platform. Air seal the ceiling of the closet around the supply plenum. If combustion and make-up air are required, provide it via a local code-approved installation.

What is an attic air handler?

Most often, air handlers are located in the attic, basement or a dedicated closet, and may closely resemble the shape of a gas furnace. As its name suggests, an air handler “handles” the air inside your home and delivers warm or cool indoor air throughout your entire home.

How much does it cost to replace a 3 ton air conditioner and air handler?

Installing a 3-ton AC unit averages $3,800. But this cost varies greatly and can be as high as $5,000 or more. Be sure to consult a pro to get the most accurate estimate for this project. Or, try out this AC size calculator below.

How much does a 2 ton air handler cost?

Air Handler (Fan Coil Unit) Prices By Size Fan Coil Size Home Size Unit Installed 1.5 ton 600-1000 sf $1,820 2 ton 1001-1300 sf $2,050 2.5 ton 1301-1600 sf $2,270 3 ton 1601-1900 sf $2,400

What is an air handler on an AC unit?

An air handler, or air handling unit (often abbreviated to AHU), is a device used to regulate and circulate air as part of a heating, ventilating, and air-conditioning (HVAC) system.

How much does it cost to replace air handler and condenser?

Home AC Condenser Repair & Replacement Cost Repairing an air conditioner condenser costs an average of $150 to $1,000 or more. Replacing the entire coil runs $900 to $2,800. Labor alone makes up about half the fees. HVAC technicians charge anywhere from $50 to $150 per hour.

Can you replace just the outside AC unit?

Often, a technician will recommend that you replace both the inside and outside portions of the air conditioner, but there are some exceptions to this. For example, if the air conditioner is relatively new and under warranty, your manufacturer may provide you with a new completely compatible unit at little or no cost.

What is an air handler vs furnace?

A furnace is an appliance that generates heat for a building by burning fuel, then distributes the heat through ducts into the rooms of the building. An air handler is an appliance that blows heated or cooled air through ducts.