Connect the occupancy sensor to the outlet, one wire at a time. The green and bare copper wires from the switchplate attach to the ground wires in the outlet. The black wires from the switchplate connect to the black wires in the outlet. Cap off any remaining wires with wire caps.
A typical line voltage wall switch occupancy sensor contains electronic circuitry. Sensing circuitry is required to perform passive infrared (PIR) or ultrasonic sensing functions to detect motion. For these applications wall switch sensors are available that are able to function without the use of a neutral conductor.
Similarly, how do you wire a motion sensor switch? Table of Contents
- Step 1: Turn Off the Power.
- Step 2: Test the Wires, and Remove the Switch.
- Step 3: Cut the Wires.
- Step 4: Strip the Black and White Wires.
- Step 5: Connect the Wires to the New Switch.
- Step 6: Tuck Wires Into the Box, and Secure the Switch.
- Step 7: Customize the Controls, and Reinstall the Wall-Plate.
Correspondingly, how do you wire multiple occupancy sensors?
To wire multiple low voltage occupancy sensors to a single or multiple power packs, complete the following:
- Tie all sensor red wires together to the red on the power pack.
- Tie all sensor black wires together with the black on the power pack.
- Tie all white wires on all sensors together.
Can you wire two motion sensors to the same light?
In order to have more than one motion sensor or motion detector turn on the same group of lights it is necessary to wire the motion sensors in parallel with each other, in the same manner as the lights are wired. As long as at least one motion sensor is detecting motion, the lights will remain on.
Can you wire an outdoor light to a plug?
Wire It Out Then Plug It In Most lights need electricity, even outdoor ones. This means wires. Don’t worry, they won’t end up all over the place ruining your yard and home’s look. Outdoor lights usually have underground wiring to keep the cables safe and hide them from view.
What are occupancy sensor switches?
An occupancy sensor is an indoor motion detecting device used to detect the presence of a person to automatically control lights or temperature or ventilation systems. Occupancy sensors are typically used to save energy, provide automatic control, and comply with building codes.
What does no neutral required mean?
The neutral wire allows the completion of the circuit and the switch to have power even when it’s turned to the off position when you want the lights off. Without this neutral wire in place, the circuit is broken any time the switch is now in the off position.
How do you override a PIR sensor?
Most motion detectors have a built-in override: Normally the switch is kept on all the time. If you turn the switch off and on within a second or so, the light will stay on, and this overrides motion detection. To go back to normal operation, turn the switch off and wait ~10 seconds, then turn back on.
How many Occupancy sensors does a power pack have?
The relay in the power pack is controlled by the occupancy sensors connected via the 22 Gauge Blue “occupancy” wire. Multiple occupancy sensors can be connected to a single power pack in order to fully cover an area.
How does an occupancy sensor work?
Occupancy and vacancy sensors are devices that detect when a space is unoccupied and accordingly automatically turn OFF (or dim) the lights, thereby saving energy. The device may also turn the lights ON automatically upon detecting the presence of people, providing convenience and a potential security aid.